How To Remove Mirror Stains From Pictures

From time to time, I've spotted a great vintage mirror at a flea marketplace or thrift store, merely if the mirror had dark spots on the drinking glass, I've just left it there because I didn't know how to fix the problem.

I constitute a geometric mirror for a great price at the thrift store the other week and instead of running from my "blackness spot fear", I decided to face information technology head on and figure information technology out instead!

It turns out there are a few tricks y'all can utilize to either totally repair, minimize, or conceal the impairment that was caused from moisture on the silver backing of the mirror.

What Causes Blackness Spots on Mirrors?

Some of the spots on mirrors are opaque areas of damage on the reflective blanket, and others are from the backing that'south been scraped or eaten away (then you can see through past the back of the mirror).

How I Remove Black Spots From a Mirror?

There are several means to remove the spots! I'one thousand sharing four ways below:

Use aluminum foil: This fox works actually well if you take the kind of spots where the backing has been scraped off and you can see through to the other side of the glass.

To do this, you lot will need to smooth out minor pieces of aluminum foil and tape them with clear record to the back of the mirror.

The reflective foil is seen from the front and is much less noticeable when you lot hang it support again. Since you lot probably already have tape and aluminum foil on paw, this is an easy solution for a few trouble spots!

Utilize mirror-like spray paint: This is a similar pick to the aluminum foil and essentially does the same thing if you lot accept the clear spot issue. Here is the spray paint I used.

If you have a agglomeration of pocket-size areas all over your mirror, it's probably more efficient to spray the whole back then whatsoever piddling spots get covered and you don't accept to foil 20 dissimilar areas.

Paint a frame to conceal trouble spots: A lot of times, sometime mirrors will take spots around the edge where h2o got splashed or steam from a bathroom would pitter-patter backside the mirror.

Simply tape off a border or design, employ a few coats of spray paint and create a new frame that covers up the spots!

I've plant that nigh spray paints will hold upwardly only fine when cleaning the mirror with glass cleaner, but y'all tin ever buy a small craft mirror and test out your pigment first.

Re-silver the mirror: Re-silvering is basically removing the protective silver backing of the mirror and reapplying those layers over again on the back of the glass.

It is a more technical procedure (run into a full tutorial here), and I think the larger the mirror, the harder it would exist for a first timer.

But, it is an option if your mirror's black spots are overwhelming and totally beyond any other repair.

Meet? That original dark area looks SO much better. Since wet is what caused the spotty damage in the showtime place, you'll want to make to protect your new mirror from farther harm past using a layer of protective polyurethane on the dorsum.

Looking for a similar mirror? Click here!

Exist sure to do it before taping the foil or after using the mirror spray paint if you are doing those options.

While it does nevertheless have that imperfect "vintage feel" to the glass, the makeover process fabricated such a difference to this forgotten treasure, and I will definitely call up over again before walking away from another cool mirror observe in the future. xo, Laura

P.S. Shopping for a new mirror? Check out our Full Length Mirror Guide (Splurge vs. Save)

Beloved this post? Sign upwardly for our newsletter for more inspiration!

Bring together Now

Supplies

• ▢ aluminum foil
• ▢ spray pigment
• ▢ painters tape

Instructions

Utilize Aluminum Foil:

• This trick works really well if you lot have the kind of spots where the backing has been scraped off and y'all can run into through to the other side of the glass.

  To do this, you will need to smoothen out small pieces of aluminum foil and tape them with clear tape to the dorsum of the mirror.

  The reflective foil is seen from the front end and is much less noticeable when you hang it support again. Since you probably already have tape and aluminum foil on hand, this is an easy solution for a few problem spots!

Apply Mirror-Similar Spray Paint:

• This is a like pick to the aluminum foil and substantially does the same thing if you accept the clear spot issue.

  If you have a bunch of modest areas all over your mirror, it's probably more efficient to spray the whole back so whatever little spots get covered and you don't have to foil 20 different areas.

Paint the Frame:

• Simply tape off a edge or design, utilise a few coats of spray paint and create a new frame that covers up the spots!

  I've found that most spray paints will hold up just fine when cleaning the mirror with glass cleaner, but you can always buy a small arts and crafts mirror and test out your paint first.

Re-Silver the Mirror:

• Re-silvering is basically removing the protective silverish bankroll of the mirror and reapplying those layers again on the back of the drinking glass.

  It is a more technical process (run into a full tutorial here), and I call back the larger the mirror, the harder it would be for a first timer.

  But, information technology is an choice if your mirror's blackness spots are overwhelming and totally beyond whatsoever other repair.

• Since moisture is what acquired the spotty impairment in the start place, y'all'll desire to make to protect your new mirror from further damage by using a layer of protective polyurethane on the back.

Source: https://abeautifulmess.com/4-soloutions-for-dark-spots-on-vintage-mirrors/

Share this post